Show Posts
1
Troubleshooting / [OPNSense]Routing for host with IPVLAN network
« on: November 01, 2022, 10:29:13 AM »
Hi HNG,
Thanks a bunch for the awesome material. I am configuring and learning my OPNSense router and I frequently refer to your pages.
I am trying to use a bunch of docker containers on a Raspberry Pi with their own IP address and I decided to use IPVLAN to have maximum control.
I have added a static route on OPNSense which specifies the Pi as a gateway for the subnets on the IPVLAN network even though there is an advisory note that says
Am I missing some setting?
Would it be possible to sort of recreate the static route with a firewall rule? Could this potentially solve my problem?
Cheers
Thanks a bunch for the awesome material. I am configuring and learning my OPNSense router and I frequently refer to your pages.
I am trying to use a bunch of docker containers on a Raspberry Pi with their own IP address and I decided to use IPVLAN to have maximum control.
I have added a static route on OPNSense which specifies the Pi as a gateway for the subnets on the IPVLAN network even though there is an advisory note that says
Quote
Do not enter static routes for networks assigned on any interface of this firewall. Static routes are only used for networks reachable via a different router, and not reachable via your default gateway.This largely works apart from the fact that my SSH connection keeps dropping. When FW optimizations are set to normal it lasts 30 seconds (same as the expiration value on Diagnostics-> Sessions) or 900 seconds for conservative.
Am I missing some setting?
Would it be possible to sort of recreate the static route with a firewall rule? Could this potentially solve my problem?
Cheers